Dryvit Knowledge Base - Topic : Installation & Toolshttp://www.dryvit.com/faq/afmmain.aspxWelcome to our knowledge base. Here you will quickly find answers to our most commonly asked questions.FAQ # 108 : What is the temperature range when applying Dryvit products to outside walls?http://www.dryvit.com/faq/?f=108Wed, 11 Nov 2009 00:00:00 GMTFAQ # 106 : We are using a Dryvit system in Augusta, Ga. I have located attachment paterns with Winlock fasteners in your e-lit, however it only gives details for EPS up to 2". As you will see in the next paragraph, we are using thicker EPS with Hilti fasteners. Please provide a recommended pattern as such. The design wind speed at this building is 100 mph. The worst case wall component and cladding wind pressure (10 ft2 area) is 25 psf. The assembly is as follows: 18" cast in place concrete wall, Tremco 250 Water proofing cured (60mils - self sealing), Mechanically fasten EPS with Hilti X-IE Insulation Fastener 4” 6-100 PH 52 No. 376475. Complete the Dryvit (hole patch, base cait, finish, etc.) per manufature's recommendations. http://www.dryvit.com/faq/?f=106Wed, 11 Nov 2009 00:00:00 GMTFAQ # 102 : I need to repair a wall that is coated with a Dryvit finish. Do I need to put a bonding agent on the existing Dryvit finish prior to applying another coat of Dryvit finish?http://www.dryvit.com/faq/?f=102Fri, 06 Nov 2009 00:00:00 GMTFAQ # 70 : What is the purpose of backwrapping?http://www.dryvit.com/faq/?f=70Tue, 15 Jul 2008 00:00:00 GMTFAQ # 69 : Why is a mock-up required for specialty finishes?http://www.dryvit.com/faq/?f=69Tue, 15 Jul 2008 00:00:00 GMTFAQ # 68 : In mechanically attached systems, what is the minimum EPS thickness?http://www.dryvit.com/faq/?f=68Tue, 15 Jul 2008 00:00:00 GMTFAQ # 67 : Is Panzer mesh overlapped?http://www.dryvit.com/faq/?f=67Tue, 15 Jul 2008 00:00:00 GMTFAQ # 66 : Can a steel trowel be used to apply Dryvit finish?http://www.dryvit.com/faq/?f=66Tue, 15 Jul 2008 00:00:00 GMTFAQ # 58 : What size notch trowel is required in applying Dryvit adhesives?http://www.dryvit.com/faq/?f=58Tue, 15 Jul 2008 00:00:00 GMT