• Systems


    Continuous Insulation (CI)
    Direct Applied
    • Continuous Insulation (CI)

      Dryvit Outsulation - the original continuous insulation (CI). This family of EIFS offered by Dryvit includes: substrate air/moisture protection, drainage for incidental rain penetration, and a durable finish system that can be enhanced to meet your needs - Dryvit Outsulation is a high-performance cladding solution.

    • Outsulation®

      Outsulation® System

    • Outsulation® Plus

      Outsulation Plus® System

    • Outsulation® MD

      Outsulation® MD System

    • Outsulation® PD

      Outsulation PD® System

    • High Durability Continuous Insulation (HDCI™)

      HDCI Systen.... High Durability Continuous Insulation

    • Direct Applied

      Direct Applied Systems

      In cases where continuous insulation (CI) is not required, Dryvit offers direct applied systems that provide an option for a Dryvit exterior finish system to be applied over exterior cement board with a water-resistive barrier and moisture drainage. This affords the architect the option to choose from traditional or specialty Dryvit finishes like brick, lymestone, granite and even metal panels for the building exterior.

    • TAFS™ I

      TAFS™ I

    • TAFS™ II

      TAFS™ II

    • Fedderlite


    • Fedderlite MP

      Fedderlite MP

    • Outsulation® PFP - Steel Stud

      Outsulation® PFP - Steel Stud


    An Exterior Insulation and Finish System with a secondary Water Resistive Barrier and an optional Non-Combustible (NC) protective coating.

    Outsulation® Plus

    An Exterior Insulation and Finish System with secondary Water Resistive Barrier, additional Drainage Medium, and an optional Non-Combustible (NC) protective coating.

    Outsulation® MD

    A commercial Exterior Insulation and Finish System with a secondary Water Resistive Barrier, optional additional Drainage Medium, 10mm Drainage Cavity and an optional Non-Combustible (NC) protective coating.

    Outsulation® PD

    A commercial Exterior Insulation and Finish System with a secondary Water Resistive Barrier, Incidental Drainage Medium, 10mm Drainage Cavity and an optional Non-Combustible (NC) protective coating. Installed by the best of the best Dryvit Listed Applicators.

    High Durability Continuous Insulation (HDCI™)

    One of Dryvit's most recent innovations, and the most durable CI system available today. Impact resistance is backed by a 20-year performance warranty! If the EIF system is punctured, we will repair it.*

    TAFS™ I

    High performance finish solutions for stucco, concrete masonry, tilt up, and other compatible substrates.

    TAFS™ II

    High performance finish solutions for stucco, concrete masonry, tilt up, and other compatible substrates.


    The Fedderlite panel assembly utilizes a unique process for embedding reinforcing channels into the CI.

    Fedderlite MP

    The Fedderlite MP panel assembly utilizes a specially designed light gauge metal frame and proprietary metal pan.

    Outsulation® PFP - Steel Stud

    The Outsulation® PFP system™ is a high performance Outsulation system over steel studs in a prefabricated panel assembly and delivered to the job site for erection on the wall.

  • Products


    Adhesives/Base Coats
    Finish Enhancements
    Lightweight and Elastomeric Finishes
    Metallic Coatings
    Reinforcing Meshes
    Stone, Masonry and Quartz Finishes
    Textured Finishes
    Topcoats and Stains
    Water Resistive Barriers
    Additional Products
    • AP Adhesive™
    • Genesis™
    • Genesis™ DM
    • Genesis™ DMS
    • NCB™
    • Primus®
    • Primus® DM
    • Rapidry DM™ 35-50
    • Rapidry DM™ 50-75
    • ShieldIt™
    • Demandit™ Smooth
    • Demandit™ Sanded
    • HDP™ Coating
    • Weatherprime™
    • Color Prime™
    • Primer with Sand™
    • Freestyle®
    • Quarzputz®
    • Sandblast®
    • Sandpebble™
    • Sandpebble™ Fine
    • Woodgrain Finishes
    • NT™ Finishes
    • HDP™ Finish
    AP Adhesive™

    One-part, urethane based adhesive


    Acrylic-modified, fibre-reinforced adhesive, base coat and leveling coat

    Genesis™ DM

    Dry mix, polymer-modified, cementitious, fibre-reinforced adhesive and base coat

    Genesis™ DMS

    Sprayable, dry blend, polymer-modified, cement-based adhesive and base coat


    A tintable, non-cementitious base coat for embedding reinforcing mesh, for re-skimming existing lamina during repair and remediation, and providing a grout coat for Custom Brick™ finishes


    Acrylic-modified adhesive and base coat

    Primus® DM

    Dry mix, polymer-modified, cementitious adhesive and base coat

    Rapidry DM™ 35-50

    Fast-setting, dry mix, polymer-modified, cementitious adhesive and base coat for use in colder weather.

    Rapidry DM™ 50-75

    Fast-setting, dry mix, polymer-modified, cementitious adhesive and base coat


    ShieldIt comprises a composite base coat system to ward off the potential damage from woodpeckers and similar pests,for new Dryvit Outsulation and existing EIFS, with a limited 10 year repair warranty available.

    Demandit™ Smooth

    Exterior/Interior Acrylic PMR™ Architectural Coating

    Demandit™ Sanded

    Exterior/Interior Acrylic PMR™ Architectural Coating

    HDP™ Coating

    Exterior Acrylic Coating with Hydrophobic Properties


    The latest technology in environmentally friendly and fade resistant StratoTone™ High Performance Colourants

    E™ Finishes

    Aggregate textured 100% acrylic-based Dirt Pickup Resistance lightweight finishes

    Weatherlastic™ Smooth

    Flexible, waterproof elastomeric exterior coating

    Weatherlastic™ Textured Finishes

    Flexible, elastomeric exterior finishes.


    High Performance Acrylic Weatherproofing Coating


    100% Acrylic coating providing a pearlescent appearance.


    Ready-To-Use Smoothing Material for Dryvit® Base Coat.

    NewBrick™ Canada

    NewBrick is a lightweight insulated brick product that is coated with a specially formulated finish.


    Colour-tinted acrylic primer for Weatherlastic™ finishes.

    Color Prime™

    Pigmented Acrylic Primer for Dryvit® Finishes

    Primer with Sand™

    Acrylic-based Primer with Sand

    Reinforcing Mesh

    Glass Fibre Mesh for Reinforcing Dryvit® Base Coats.

    Custom Brick™

    Brick made energy Efficient


    100% Acrylic-Based Finish with Large Mica Chips and Multi-Colour Quartz Aggregates


    Limestone made lightweight, durable, affordable and energy efficient


    100% Acrylic-Based Finish with Multi-Coloured Quartz Aggregates.

    Stone Mist™

    Exterior and Interior Quartz Aggregate Finish


    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish


    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish


    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish


    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

    Sandpebble™ Fine

    "Original" Aggregate textured 100% Acrylic-Based Dirt Pickup Resistance Finish

    Woodgrain Finishes

    The look and feel of wood, the performance of Dryvit™

    NT™ Finishes

    Aggregate Textured 100% Acrylic-Based Dirt Pickup Resistance Finishes, with Improved Application Characteristics

    HDP™ Finish

    Textured 100% Acrylic Finishes with Hydrophobic Properties

    Tuscan Glaze™

    100% Acrylic custom antique stain.


    Clear Acrylic Primer-Sealer

    Backstop™ NT-Texture

    A high performance, non-cementitious water-resistive membrane and air barrier.

    Backstop™ NT-VB

    A high performance, non-cementitious water-resistive membrane and air/vapour barrier.


    A polymer-based, water resistant base coat and adhesive

    AquaFlash® Flashing System

    A liquid-applied flashing material and mesh for sealing rough openings at windows, doors and other wall penetrations.


    An Acrylic Admixture for Portland Cement Mixes

    EPS Insulation Board

    Expanded Polystyrene Insulation Board for use in Dryvit Systems


    Fast-setting, non-sagging, patching material.


Our Solutions

Proven, Testing Cladding Solutions

With lower installed and operating costs, as well as having continuous insulation (CI) as an embedded component of the fully-tested system, the Outsulation® family of systems are the perfect new building answer for those desiring optimal design flexibility and green building values.  Best of all: you can get all of this - from the substrate out to the exterior finish - with a single cladding contractor, making scheduling easier, less costly and more efficient.

New Build
Springhill Suites Marriott

Vaughan, ON

Nixon Wenger Office

Vernon, BC

Bellagio Resort and Casino

Las Vegas, NV

Atlantic Station

Atlanta, GA

Courtyard Marriott

Clarksville, TN

St. Mary and St. Mena Coptic Orthodox Church

Cranston, RI

More than 500,000 Building Success Stories

Here are just a few examples of how Outsulation® systems have been used to create high performance, energy code-compliant building exteriors in many building types.

Hotel Gets The Look Of Brick And Exceeds Energy Code Requirements

Developer Raj Patel had long wanted to put a hotel near Hartsfield-Jackson Atlanta International Airport for the obvious reason: It is the busiest airport in the world." In 2014, Patel's Company, Rossmore Management Group, achieved that goal, opening the doors in September to the 122-room Homewood Suites by Hilton Atlanta Airport North in the city of East Point north of the big airport.

Read More

Liberty Center: Meeting a Compressed Construction Timeline

From concept to completion, the construction of the Liberty Center was no easy feat. At 1.2 million square feet, the mixed-use megaplex was designed by architect KA, Inc. to appear as if it were a series of distinct buildings with different façades-similar to how a city block may look over time.

Read More

Metro Career Academy

The exterior of the Metro Career Academy was designed to be brick and limestone at a cost of over $960,000. This amount was reduced by over $500,000 by using Outsulation® by Dryvit®. The result is energy code compliant, LEED certified, and looks EXACTLY as originally designed.

Read More

The Exterior Cladding Renovation Leader Since 1969
There are tens of thousands of existing buildings in need of more than just exterior repairs and a face lift; many lack sufficient insulation and cost more to heat and cool than a building with an Outsulation® system.  That's why we offer ReVyvit by Dryvit: our industry leading renovation solution set.  No matter the building type or the level of renovation required, we have a solution to make your building not only perform better and in a less costly way, but look better than it ever has before.ReVyvit Logo
 Ds211 Revyvit Table
ReVyvit Brochure
CB&E Office Building

Chesterfield, MO

Tremco Headquarters

Beachwood, OH

1050 Broadview

Toronto, ON

Jackson Tower

Harrisburg, PA

Sherwin Williams

Spencer, IA


Biloxi, MS

ReVyvit by Dryvit

Dryvit has been at the center of the exterior cladding renovation business since 1969.  Why?  Because our ReVyvit by Dryvit renovation program offers a range of renovation solutions: from simply re-coating the existing exterior all the way to a complete over-clad with an Outsulation® system.  Whether your building is EIFS or not, we have the perfect renovation solution for you!

Luxury Car Dealership Gets More Than A Facelift

A 100-year old brick building painted a distinctive yellow had long been a sort of odd landmark in the Illinois capital city of Springfield. Located just two short blocks from the looming state capital and surrounded by brick buildings in almost every direction, the luxury Isringhausen BMW car dealership was confronted with a unique design challenge when it decided to renovate.

Read More

Pearl River Hilton

Originally built in 1988 using Dryvit Outsulation, this landmark hotel was starting to show its age.  So nearly 20 years after it was first built, a decision was made to restore this property to its original pristine condition.  Learn how DryvitCARE made this possible. 

Read More


Dryvit Outsulation can improve aesthetics, increase property value, meet building code requirements and maximize your building's energy efficiency with an attractive return on investment.  Outsulation is ideal for both renovation and new construction and offers a wide range of durable finishes to create almost any look you desire.  Whether your property is commercial or residential, Dryvit Outsulation provides benefits for you.

Read More

Revolutionzing Protection of The Building Substrate

Traditional papers and wraps create obvious paths for moisture to reach- and compromise- the substrate. Our seamless, liquid applied air and water-resistive barriers stop moisture in its tracks, keeping your substrate protected. Whether you are applying it under an Outsulation® system or a non-EIFS wall assembly, we've got your building substrate covered!

Re-Imagining the Protection of Building Substrates

The best way to understand how our seamless, liquid-applied air and water-resistive barrier products work is to see how it is applied to the wall. The videos below speak for themselves.

Factory-Applied Precision Brought Right to your Job Site

Pre-fabricated panels offer more than just factory-controlled system application; with them you can build in colder climates and your building envelope goes up faster, allowing less disruption on the job site and permitting you to work on the interior fittings faster once the exterior is complete.

Modulite LogoWith our Modulite pre-fabricated panel program, you get all of the benefits of the traditional Outsulation® system, - lower installed cost, lower annual operating costs, lower environmental costs and limitless design flexibility-all in a factory-controlled environment.


      Panelization Brochure Photo

Le Meridien

Completed Panel Being Hoisted onto Building

Finishing a Panel With Speed and Consistency


Pittsburgh, PA

Panels are Finished and Ready For Shipment

Fedderlite Extrusion in EPS

Quality Control Exceeded on by The Speed of Application

Here are some examples of how the use of Modulite panels can help provide a host of advantages over traditional field applied Outsulation® systems.

Le Méridien Columbus, The Joseph: Panelized Cladding for a Tight Construction Site

The 13-story Le Méridien Columbus, The Joseph boutique hotel was designed by architect Arquitectonica with modern architectural features including conventional stucco on its 10 topmost floors and a brick veneer accented with metal panels.

Read More

Build a Luxurious High-Rise Building in the Dead of a Minnesota Winter

The Melrose Apartment building was constructed in the dead of winter in harsh Minnesota weather.  Prefabricating the exterior panels for this project was the only way to complete the project within the time allotted.

Read More


Panel fabricator, Rob Little, and panel installer, Robert Sutton, speak about the benefits of Panelization in construction today.  They touch upon the benefits to not only the fabricator trade, but also the architect and building owner.

Read More

Designs Limited Only By The Imagination

The extraordinary design flexibility of the Dryvit Outsulation® system is what distinguishes it from all other exterior cladding choices. You want your building to be brick? Check. Granite? Check. Metal panel? Got that too. And in just about any color under the rainbow. Finally, by easily adding decorative shapes the architect can recreate classic architecture at a cost far more affordable than with traditional building materials. Or even create the next design standard!

View Finishes
Terraneo Finish

Cincinnati, OH

Terraneo Finish

Stevensville, MD

Custom Brick and Terraneo

Stamford, CT

Sandpebble Finish

Greensboro, SC

EPS Foam Shapes

Minneapolis, MN

EPS Foam Shapes

Atlanta, GA

Finishes and Shapes: The Designer's Best Friend

The following case studies illustrate how finishes and shapes from Dryvit play an integral role in increasing curb appeal and building value. And with our incredible range of colors available, we can provide an exterior appearance to suit any aesthetic or corporate brand standard.

Hotel Gets The Look Of Brick And Exceeds Energy Code Requirements

Developer Raj Patel had long wanted to put up a hotel near Hartsfield-Jackson Atlanta International Airport for the obvious reason: “It is the busiest airport in the world.” In 2014, Patel’s company, Rossmore Management Group, achieved that goal, opening the doors in September to the 122-room Homewood Suites by Hilton Atlanta Airport North in the city of East Point north of the big airport.

Read More

Owner Saves Money and Time, While Maintaining Original Design

A 5,000 sq. ft. Dryvit Outsulation® wall assembly accentuated by approximately 900 square feet of panels coated with Reflectit™ – an acrylic coating that looks like aluminum panels – proved to be just the right touch for the façade of a TGI Fridays restaurant recently constructed in Fairview Heights, IL, a suburb of St. Louis.

Read More

St. Louis Curb Appeal

Design flexibility is critical to architects and specifiers.  Dryvit’s many textures and colors offer design freedom at a price the building owner can afford.  Listen to these building professionals talk about how Dryvit’s Reflectit coating enabled them to get the look of metal panels  with all of the benefits of an Outsulation system.

Read More

New Brick Logo _large _color

Click image below for information on NewBrick by Dryvit

New Microsite - NewBrick® by Dryvit

Introducing NewBrick®

Simply put, NewBrick is the biggest innovation in brick. Ever. Now you can get the look of brick you want without all of the weight, hassle and cost associated with old, heavy traditional clay brick. Here are all the ways NewBrick by Dryvit® is just a better way to build with brick!

Lightweight is better!

  • At only 11.96 kg/m2 (2.45 lbs/ft2) before mortar, resulting in higher daily productivity
  • Safer to work with-especially on multi-story construction projects
  • Easy to cut and very little dust
  • Compresses the exterior construction schedules
  • More brick per truck lowers transportation costs
  • Eliminates ties, pans, shelf angles, and weight bearing footers

  • Quick and Easy Installation
  • When installed over Outsulation® or Stratum Guard® CI, the system includes air, water and vapour barriers, continuous insulation (CI) and a veneer that comes with a complete system warranty
  • Single manufacturer and installed by a single contractor simplifies job site responsibilities and reduces coordination between trades
  • Can be installed direct to nearly any solid substrate or a Dryvit Outsulation® or Stratum Guard® system basecoat
  • Eliminates the need for support elements like shelves, pans or ties
  • Easy to repair if damaged
  • Simple yet versatile, allowing for decorative brick patterns and architectural detailing to be easily accomplished
Energy Efficient!

  • Thermal insulation built right into NewBrick helps to reduce energy bills
  • When used in combination with Outsulation or Stratum Guard CI, it can contribute to LEED credits
View NewBrick
Arby's Restaurant

Lakeview, NY

Close Up of NewBrick

Window Detail

Grouting NewBrick

240 Broadway

Schenectady, NY

Standard and Custom Patterns

Installing NewBrick by Dryvit Video

Read More

DS110 Form

Before you download, please fill out the information below.